GDF-P06: 52 mm Gauge Pod (practice project)
A clean way to add a 52 mm gauge, with a pod that grips the gauge without glue and a base shaped to match a curved dash. (Practice project: an original drawing set in the Gearhed Design & Fabrication title block, not a client job.)
Print coming soon.

The design
- Pod cup (06-1): a Ø52.3 bore with six 0.3 mm crush ribs that hold the gauge snug, a 45° shoulder stepping down to a Ø40 wire exit, and a Ø63 bezel flange.
- Angled base (06-2): a 15° face toward the driver, with a concave R180 bottom that follows the dash curve and a tape recess that follows the same curve.
- M4 brass heat-set inserts for mounting. The assembly sheet also shows an A-pillar mount option.
- Planned in ASA for heat and UV resistance.
The process
Zack modeled it in Onshape from 2D reference prints. The final parts matched the reference within 0.08%, and the assembly had zero interference. He also caught radius vs. diameter callout errors along the way.
Skills shown
Revolve with a 45° shoulder, crush-rib fit tolerancing, patterned features, auxiliary angled datums, curved R180 mating faces, a curve-following tape recess, and checking drawings.
The drawing sheets
Original practice drawing package (GDF-P06). Select a sheet to open it full size, or download all three sheets as a PDF.
Need a gauge pod or mount for your build?
Request a quote

